Search the Community
Showing results for tags 'tc2'.
Found 3 results
There are actually quite a lot of people who keep having problems just because of either outdated server side maps, or because they can't extract them with modified client properly. So, I've written this tutorial. I know that my way of doing this thing may be rather unclean and someone might point out that those are not things one is supposed to do, BUT they prevent from happening absolutely all kinds of errors and mistakes I've ever encountered so far. TC extractors seem to be not very well written for modded clients, at least they used to be very bad whenever it came to extracting custom stuff. 1 - What are they for? maps - Maps are here to let server know where are map tiles and which area IDs are on them (and where). Its possible that they contain even more data (I honestly don't know), but this is the most important basics we commonly need maps for. vmaps - Vector maps are here mostly to let server know where are WMOs and their interiors. This gives server possibility to prevent NPCs from attacking players they clearly can't see, for example, NPCs from building's basement won't attack player when he's just going around building. They are just optional, but highly recommended to have. mmaps - Movement maps are here to give server information about collisions, so it can make NPCs move in optimal cases only though paths which would be reachable by player as well. So, basically, instead of just jumping on 10yd high rock, they try to find a way up on it. Again, optional, but in most cases good to have. So, in general, when you don't have up-to-date map files for your custom zones, NPCs can behave in a really buggy and weird way, but what also can't work properly are custom graveyards, fishing loots, who lists, general chats and more area based stuff like that. 2 - Getting extractors First of all, determine, which maps you want to have on your server. Only maps are really essential, vmaps and mmaps are optional. All 3 maps can be about 2,5-2,7GB big, if you choose to use just maps, they will get much smaller. If you are using repack, you most likely get extractors (or otherwise it sucks even more hard, than most of repacks do) with it. If you've compiled your own core, you should be able to find extractors in folder to which your server binaries were generated. You should get mapextractor.exe, mmaps_generator.exe, vmap4extractor.exe, vmap4assembler.exe from there. If you use a repack and don't have extractors there, find another repack or compile your own core. Using extractors from different revisions of TC might work for you, but it also may not and I can't recommend you to do so. If you have compiled your own core and you don't have extractors, you have most likely disabled their compilation in CMake. Enable them there (they are usually in TOOLS) and re-compile your TC. 3 - Preparation I highly recommend to copy your WoW client and make client which will serve only for extracting server side stuff. We'll kinda break some things here and our modified client might even stop working. Otherwise at least make backups of all MPQ's you will edit. Put all 4 extractors into WoW's root directory (where WoW.exe is located). Go to your Data directory. Make sure there are only following MPQs: common, common-2, expansion, lichking, patch, patch-2, patch-3. Delete (or move out) all other (custom) MPQs you may have there. Now, normally you should be able to put your stuff into patch-4, but I've already encountered situation when extractors cleverly detected my client as WotLK client and happily ignored patch-4. So, I would recommend you to put all your custom stuff (models, ADTs, WDTs, everything you have in your custom patches) into patch-3. If you are going to use patch-3.mpq, open it and go to Operations menu, choose Change Hash Table Size and increase it to maximum. Otherwise your stuff likely won't fit in it. There's one more thing you need to do here, in case you have edited any blizzlike maps. What I've encountered in past was that extractors were using blizzlike WDT files (and ADTs in them), while completely ignoring my own custom version of that WDT saved in patch-3. Having multiple versions of map in different MPQs also led commonly to extracting data from outdated versions. So, to make really absolutely sure that extractors will actually read your and not blizzlike stuff and stuff which is up-to-date, you need to do one of the following, depending on what kind of edits you did. If you have...: ... only edited a few ADTs of a continent, just place them into World/Maps/(mapname)/ folder into MPQ where blizzlike version of those ADTs is. ... edited WDT of that continent to make it bigger/smaller, extract all blizzlike ADTs and WDT of that continent, delete them from blizzlike MPQs, merge them with your custom and edited ones, delete any ADTs you have deleted if you have deleted any from original map (so you will make one big folder with ALL data of that map which is up-to-date, with both unedited ADTs and all ADTs you have edited) and put it into patch-3. ... completely deleted all data of some blizzlike map to make wholly new one on its ID, just delete all blizzlike files of that map (even if blizzlike version was in patch-3 itself!), put yours into patch-3 and you're done. The last thing you need to do is to go to your locale folder in Data folder (enGB, enUS, ruRU, deDE... whatever you have) and open the second last locale MPQ there (patch-enGB-3, patch-enUS-3...). Put all your edited DBCs into its DBFilesClient folder. 4 - Extraction itself Go to WoW's root folder, open Wordpad and enter into it the following: vmap4extractor.exe md vmaps md mmaps vmap4assembler.exe Buildings vmaps pause Save it as whatever with .bat extension, like "extract_vmaps.bat" into WoW's root folder. Now run mapextractor.exe. When its done, run your .bat file you have created. When that is done, run mmapextractor.exe. Ofc, if you don't want to use mmaps or even vmaps at all, skip last or last two steps. If this is not the first time you are creating server-side maps (you are re-generating/updating them), I HIGHLY recommend deleting ALL old server-side maps and completely replacing them with new ones, so no old files remain there. Thats all, copy/upload your maps, vmaps and mmaps folders to your server's data folder and everything should work fine and be up-to-date. A little note: the newest version of TC2 seems to be working with some new server side files, called cameras. They are supposed to be extracted with maps. If thats what your extractor's have created, just put them into server's data folder as well ofc.
176 downloadsHello there little whelps, I used to use patch made by one guy from Ownedcore which included all M2s and WMOs existing in WoW turned into spawnable gameobjects. That means that you can simply search for model name in game and you will always find gob you can spawn. Its just great thing for gob spammers, I know, but problem is that patch from Ownedcore is just horrible in my opinion. It contains a LOT of completely unneeded objects and displayIDs and also is full of displayIDs with messed up bounding boxes (all copied from one blizzlike one), which leads into gobs lootable from 50yd distances an another funny results. So I made my own patch. Here is MPQ patch, DBC file and SQL dump (for TrinityCore2 revisions after WDBVerified column was renamed to VerifiedBuild). I tryed to make this completely noob-friendly so if you want to use this patch, you don't need to know anything about MPQ patches or DBC files, you just need to know the very basics of running TrinityCore2 server. READ README file. You will find how-to guide there. All gobs with custom displayIDs have [AmPatch] placed behind their postfixes and have entrys 410000 and higher. Their displayIDs are 10000 and higher, meaning that every gob has displayID=entry-400000. Good for searching for displayIDs. Version 1 - light pack This version contains all M2s and WMOs from World and Spell folders as spawnable gameobjects. Others were excluded, because majority of them just can't be used as gobs (they have no hardcoded textures for example - they are white completely ingame). Version 2 - full pack This pack contains really ALL M2s, even character, item, creature... And its needless to say that most of such things are completely useless as gobs. But someone still may preffer this version. If you want to create your own gob patch, you may use my tool I've released. It doesn't give you possibility to filter which gobs you can use, but it works. You will want to use this tool if you are retro-porting models or creating custom ones (in general, if you want to have gobs made of models which are not in blizzlike WotLK client).
57 downloadsJust a simple tool for calculating PlayerBytes and PlayerBytes2 in characters.characters table for WotLK TC2 database (may work with newer or different databases as well, but that needs to be tested). It may be usefull especially for projects where NPCs based on player looks or players based on NPC looks are being used. It is able to get: Skin color Face Hair style Hair color Facial feature From PlayerBytes and PlayerBytes2, or it is also capable of doing exactly opposite - getting bytes from character display IDs. The problem is that alghoritm which core uses for generating PlayerBytes seems to come up with sometimes different values (although they give the same IDs as my alghoritm when being converted back). That may possibly cause some bugs or issues, hopefully not, but I would like to point that out anyway. So, use this tool carefully and feel free to let me know about anything you find out or if it just works fine for you. Getting IDs from bytes should definitely work without any problems, getting bytes from IDs - use that carefully. Thats all.